Precautions for using starter -Written by GNT Technology Department
1. The normal working time of the starter is 1.5~2s, and the maximum working time shall not exceed 5s at a time. If the host has not been started for more than 5s, the starting must be interrupted and started again after an interval of 20~30s. If it fails to start normally three times, you must check whether there is a fault in the circuit or engine, and then start again after troubleshooting.
2. Since the starter is usually installed next to the engine and has a very high ambient temperature, it is necessary to prevent the entire vehicle from being soaked in water when it is hot, causing damage to parts.
3. When the engine is not working for a long time, try not to leave the key in the "ON" position, otherwise the battery will be completely discharged. Before turning the ignition key to the "START" position, be sure to place the gear lever in neutral.
4. Do not step on the accelerator pedal when starting the ignition.
If you have any questions, please feel free to contact our department staff at any time
Click here to Contact GNT